Call us at 1-888-826-6342
Call us at 1-888-826-6342.
RTD Probes with Mounting Threads & Micro-DIN Connectors
RTD Temperature Sensors With Micro-DIN Connectors
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $156.05 |
| 5-9 | $148.25 |
| 10-24 | $145.13 |
| 25-49 | $138.88 |
| 50-99 | $135.76 |
| 100+ | $132.64 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- IP65 Rated
- 316 Stainless Steel
- Pt100 and Pt1000 Options Available
- High Accuracy, with Pt100 Class A, 4-Wire Construction as Standard
- Maximum Temperature: 250°C (480°F) Process, 125°C (257°F) Connector
- Minimum Temperature: -30°C (-22°F) Process and Connector
- Pressure Rating: 150 Bar
- Any Sheath Length Available - See Note Below “To Order” Table
PR-24-3-100-A-1/2-1/4-2 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Process Temperature Unit
Process Temperature Min
Process Temperature Max
Process Temperature Range
Sensor Application
Process Connection Size
Accuracy
Nominal Output
Number of Wires
Sheath Material
Probe Diameter
Probe Length
Termination Connection Type
Category
Omega’s PR-24 Series RTD probes feature industry standard micro-DIN connectors for ease of installation and fast replacement. The IP65 rated connector with an all stainless steel sheath and integral thread construction is ideally suited for use in demanding industrial environments. Standard process threads are G1/4", G1/2", 1/4" NPT and 1/2" NPT other threads are available on request.
Rated 5 out of
5
by
Enoch G from
Great for limited space!
The temperature probes with a two inch probe allows installation into a tighter space. Works great!
Date published: 2023-02-08
Can you provide a STEP model for this connector?
Thank you for your inquiry. Please send your request to temp@omega.com and we can review and advise.
Date published: 2021-08-09
I am going to be using with an i-Series 1/8 DIN Temperature Process and Strain PID Controllers (PN CNI8A44-C24). What RTD type should I select, 392.4 or 385.4?
The RTD type you should select is the 385 which is considered the world wide standard. Please contact our Tech Support if you have any further questions. Thanks!
Date published: 2019-05-16
Accessories
