Call us at 1-888-826-6342
RTD Probe with Insulated Wire and Shrink-Tube Support
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | $151.56 |
| 5-9 | $143.98 |
| 10-24 | $140.95 |
| 25-49 | $134.89 |
| 50-99 | $131.86 |
| 100+ | $128.83 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Low temperature range: -50 to 250°C (-58 to 482°F)
- High temperature range: -50 to 450°C (-58 to 842°F)
- Extreme temperature range: -200 to 600°C (-328 to 1112°F)
- Class A accuracy conforming to IEC 60751
PR-10E-3-100-1/8-6 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination or click the CONFIGURE button to build your own.
Process Temperature Min
Process Temperature Max
Process Temperature Range
Nominal Output
Number Of Wires
Sheath Material
Probe Diameter
Probe Length
Cable Length
Additional Feature
Category
Process Temperature Unit
Sensor Application
Accuracy
Cable Insulation
Wire Gauge
Termination Connection Type
- Accuracy Class A from -100°C to 450°C (-148 to 842°F); Class B otherwise, per IEC 60751
- Cold-End Max Temperature Low (L);High (H) and Extreme (E), 250°C (482°F)
- Dimensions Standard diameters of 1/8”, 3/16”, and 1/4” ; variable lengths
- Ingress Protection IP67 (with exception of “High” (10H) type)
- Nominal Resistance Curve Choice of PT100Ω or PT1000Ω
- Process Temperature Range -200 to 600°C (-328 to 1112°F)
- Protection head None
- Wire Length / Terminations 40” standard (longer lengths available)
Omega's RTD probe with insulated lead wire has a shrink-tube strain relief support at the sheath/wire transition to provide wire flexibility and durability. This 316 stainless steel probe is offered in 2-, 3-, or 4-wire configuration. This is available in three temperature ranges covering -200°C to 600°C (-328 to 1112°F) to accommodate your specific temperature needs. Applications for this probe include liquid immersion, slurries and emulsions, granular material measurements, as well as temperature monitoring of heat bars, kilns, and pipes.
Rated 5 out of
5
by
Jason h from
Omega
arrived quickly and read accurate when installed. no wiring schematic made connecting a little difficult, but as there is only 3 wires it was easy to figure out
Date published: 2022-02-17
Rated 5 out of
5
by
MSSG from
RTD
This is an standard commonly used in the industry for low temperature monitoring.
Stable, reliable, efficient and good application instead of a thermocouple.
I ordered many of them for our projects.
Date published: 2022-01-20
Rated 5 out of
5
by
Julio from
RTD
Work pretty good. Got the RTD within 2 weeks instead of the 1 month I was told.
Date published: 2021-06-25
Rated 5 out of
5
by
Eng1 from
Quality and consistent construction
The large number of configurations of these probes is helpful to find one that is just right for the application.
Date published: 2020-12-07
Rated 2 out of
5
by
Todd W from
RTD Bad Ground
The RTD is a three wire unit that appears robust and arrived in the configuration that was ordered. However, when it was connected to the digital controller for the oven, the sensor signal was lost each time the oven reached about 120 F. Tracing the issue revealed that one of the ground wires from the RTD had a bad connection. Just touching the wire as it exited the sensor would cause it to loss connection. The wire was not strained during installation given the generous space afforded by the oven. Since my lead wire is only 6' long, I am not so concerned about the added accuracy a 3-wire RTD offers over a 2-wire. So, I placed a jumper on the controller to connect both of the grounds together. If the lead time for ordering a new RTD was not so long, I would have returned this defective unit.
Date published: 2020-08-21
Hello. What length of PT-1000 tip must be in touch with fluids? This length is the same as the one of PT-100? Thank you.
Thank you for your inquiry. The immersion depth for all the RTD probes is 20 times the diameter of the probe.
Date published: 2022-12-03
What is the Max temp of the wire sheath of this probe?
Thank you for your inquiry Jim06. The maximum temperature for the PFA insulation on the wire of this probe is 260 C
Date published: 2023-10-14
Any alternative wire sheath can withstand 400C?
Thank you for your inquiry. Unfortunately we don't make a higher temperature wire beyond 250°C.
Date published: 2022-10-31
