M12 Cable, 4 pin, Field Mountable, for Transmitters, RTDM12 Cables with Field Mountable Connectors for Resistance Sensors (RTDs)
Please add to cart to keep it or exit the configuration
- Straight and Right Angled M12 Field Mountable Connector Sensor End
- Available in FEP and PVC Cable Insulations
- 4-Wire Construction, Field Re-Wireable
- Optional Stainless Steel Braid and BX Hose Options
- Variety of Connection Methods to Work with Your Instrumentation
M12CFM-T24SSPC-SFSR-FL-15 Model OptionsView all models
Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
To configure your cable, simply determine the following information:
Omega offers two cable options: FEP ('T24SSPC') cables with stranded silver plated copper conductors and PVC ('P24STPC') cables with stranded tin plated copper conductors. Note: The same material is used for both the conductor insulation and over jacket.
These cables are the same as those used in our wide variety of RTD sensor products.
Since our M12 enabled RTD sensors all utilize a plug style connector, you will most likely need a socket style connector to attach the cable to the sensor. These connectors are available in either straight (SFSR) or right angled (RFSR) configurations. Please note the following wiring information:
|M12 Connector |
|Conductor Color||TA3 Connector||TA4 Connector||Mini Din Connector||OTP/MTP Connector|
Process Connection: The process connection can vary from stripped leads (FL), to another M12 style connector to one of the many styles of instrument connectors for which Omega is well known. Some of the most popular include straight M12 male connector (SMSR), right angled M12 male connector (RMSR), TA3F or TA4F audio connectors, minidin connectors, and full size round pin connector (OTP) or miniature blade pinned connectors (MTP).
Cable Length: The final requirement is the length of your cable. Omega specifies the length of the cable in meters. Our standard selection of cables are provided in 3, 5, 10, 15 and 20 meter lengths, but these cables can be provided in just about any length needed. The length of the cable in meters is simply listed on the end of the model number.
Omega has selected a number of these cables to be available as standard configurations, they are listed below. Also, there are additional special options such as external steel braid or armored hose that can be specified, please see the listing at the end of the product table.