1/16 DIN Temperature Controllers with Autotune, Alarms and RS485
1/16 DIN Temperature Controllers
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $118.01 |
| 10-24 | $112.11 |
| 25-49 | $106.21 |
| 50-99 | $100.31 |
| 100-499 | $94.41 |
| 500+ | $88.51 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- 1/16 DIN temperature controller with Dual Display
- Autotune
- RS-485 Communications
- Free Software
- Alarm Functions
- Thermocouple/ RTD Inputs
- Output Status
Edit Options
View all modelsNot all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Measurement Type
Control Outputs
Form Factor
Number of Inputs
Input Type
Communications
Supply Voltage Type
Display Type
Output Type
Product Specs
The CN740 Series temperature controllers offer accurate temperature measurement and control in a 1/16 DIN package. Designed for direct or reverse acting (cooling or heating) control, the CN740 Series can be programmed for simple ON/OFF or more complex PID control functions. PID control is supported with manual or autotuning. Select relay, DC pulse or current output for control methods. The CN740 Series accepts a variety of thermocouple and RTD inputs. Process value and set-point value are displayed simultaneously on the large dual LED. Auto-tuning, engineering units (°F or °C), and alarm status is also indicated on the faceplate. Two alarm outputs are included on the unit with 12 preprogrammed alarm functions.Input Types Range Pt100Ω RTD 0 to 100°C (32 to 212°F)
-20 to 500°C (-4 to 932°F)
-200 to 600°C (-328 to 1112°F)B Thermocouple 100 to 1800°C (212 to 3272°F) S Thermocouple 0 to 1700°C (32 to 3092°F) R Thermocouple 0 to 1700°C (32 to 3092°F) N Thermocouple -200 to 1300°C (-328 to 2372°F) E Thermocouple 0 to 600°C (32 to 1112°F) T Thermocouple -20 to 400°C (-4 to 752°F)
-200 to 400°C (-328 to 752°F)J Thermocouple -20 to 400°C (-4 to 752°F)
-100 to 850°C (-148 to 1562°F)K Thermocouple -200 to 1300°C (-328 to 2372°F)
-200 to 500°C (-328 to 932°F)L Thermocouple -200 to 500°C (-328 to 932°F) U Thermocouple -200 to 800°C (-328 to 1472°F)
SPECIFICATIONS
Inputs: Thermocouple, RTD, see chart
Display: Two 4-digit, 7 segment 6.35 mm (0.25') H LEDs
PV: Red
SV: Green
Resolution: 1 degree
Accuracy: ±0.25% span, ±1 least significant digit
Supply Voltage: 100 to 240 Vac, 50/60 Hz
Power Consumption: 5 VA max
Operating Temperature: 0 to 50°C (32 to 122°F)
Memory Backup: Nonvolatile memory
Control Output Ratings:
Relay: SPST, 5A @ 250 Vac resistive
Voltage Pulse: 14 Vdc, 10 to -20% (max 40 mA)
Current: 4 to 20 mA
Communication: RS-485 MODBUS® communication protocol
Panel Cut-Out: 48 mm square (1.89' square) Maximum Panel
Thickness: 9.50 mm (0.375')
Weight: 114 g (4 oz)
Front Panel Rating: IP66
Rated 5 out of
5
by
Just some guy from
inexpensive, works well.
I use this controller to maintain the temp in a molten salt furnace. With the auto tune it holds a constant temp with minimal over shoot and fast reaction time.
Date published: 2016-03-03
Rated 2 out of
5
by
Mr Z from
Reliability is marginal
Originally had six units, three failed after 1 year. The internal relay contacts became intermittent, one fused in the "on" position. They are only switching 2 amps, and are rated for 5.
Date published: 2017-02-24
Rated 5 out of
5
by
John6800 from
Controller features have On/Off and PID Control
Because this controller has both On/Off & PID Control I was able to configure it to my oven.
Date published: 2018-03-28
Rated 5 out of
5
by
Bobble from
Great Service
Bought this recently and pleased that I did, it performs as advertised.
Date published: 2017-10-26
Rated 5 out of
5
by
Nare from
Amazing little control marvel
Great product with the right features. It does just what I need from a proportional control
Date published: 2017-02-23
Rated 5 out of
5
by
Mike from
CN740 Series Temperature Controller
Omega,
I recently perched a PID Temperature Controller, model CN745, in a 1/16 DIN package form you and found it to be a very good product at a reasonable price. I am very happy with it.
Thanks again.
Mike Carpenter
Date published: 2016-02-21
Can this model be used for over-temperature protection?
Hi Kathy,
The CN743 would not be recommended for use as a limit controller. The CN2516-R1 would be a 1/16 DIN size controller that would be suited for use as an over-temperature limit controller. It has the ability to latch which is what you'll want as a feature in a true limit controller.
Date published: 2020-03-09
I'm confused what the "relay" output means. Does that mean that I do not need a separate solid state relay? My understanding was to use this and connect the output to a SSR, however I am now now sure
Thank you for your inquiry! The answer will depend on if your load pulls over the maximum current rating for the CN743's relay, which is 5A. If your load pulls under 5A, you will not require an SSR.
Application Engineer CK
Date published: 2021-05-07
For the CN745, I did not see an "Output" option in the Communication Parameters List. Does this exist?
Thank you for the inquiry. Please forward this question to TEMP@OMEGA.COM so that we can better support you.
Best regards
OMEGA
Date published: 2020-07-17
Is the relay output just a simple on/off signal? Is the DC Pulse a PWM signal, and, if so, what is the duty cycle and frequency range?
Hi AJRS,
Both relay and pulse outputs can be used as PID control. Output is based on cycle time not PWM and is set by user. Cycle time down to 1 second is available. But fastest relay cycle time should limited to 7 to 10 seconds.
Best regards
Date published: 2020-11-20
for CN745, the product does require any solid state relay? I am not sure that in case of current output control any solid state relay is required. Could you recommend any solid state relay or items which are required to be purchased with the CN745?
Output #1 is an analog control output that can be programmed using the PID tuning parameters.to control your process. You can either manually tune the PID values, or use Auto tune providing the process is for temperature and you have a set point at least 100 degrees (C or F) above your starting ambient temperature.
Date published: 2020-02-12
Accessories
Noise Suppression RC snubber (2 leads), 110 to 230 Vac for mechanical relay models driving AC contactors or solenoids
$30.00
136 In Stock
CE