Call us at 1-888-826-6342
LVDT Linear Position Sensors with AC Output
-25 to 25 mm, AC Output
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $588.28 |
| 10-24 | $558.87 |
| 25-49 | $547.10 |
| 50-99 | $523.57 |
| 100+ | $511.80 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Being replaced by the new LD320A Series
- 2.5 to 75 mm travel
- <0.2% Linearity
- Rugged 19 mm Dia. Stainless Steel Body
LD320-25 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Range
Housing Length
Linearity
Electrical Output
Rating
Housing Diameter/Width
The LD320 series has been replaced by the new and improved LD320A series. Many ranges are in stock, available for immediate shipment.
The LD320 Series displacement sensors have a stainless steel body with improved IP67-rated sealing, coupled with new polymer guides with rigid carriers. These transducers are accurate and reliable, especially in wet and corrosive conditions. An unusually large bore-to-core clearance is maintained throughout the range, even on transducers fitted with on-board signal conditioning. This makes installation easier and helps prevent misalignment.SPECIFICATIONS
Linearity: <0.2% FSO
Residual Voltage at Null Position: <0.5% FSO
Storage Temp: -40 to 120°C (-40 to 248°F)
Operating Temp: -40 to 120°C (-40 to 248°F)
Protection Rating: IP67
Vibration (Sinusoidal Frequency):
10 to 50 Hz: 1 to 10 g rms linear
50 Hz to 1 kHz: 10 g rms linear
Shock:
Drop Testing: 1 m (3') onto hard surface
Topple Testing: 10 times each end onto hard surface
Case Material: 300 SS
Cable: PFA, 2 m (6') long
Core Material: Nickel-Iron
Rated 4 out of
5
by
Senior Buyer from
Stress Free Orders
Our company orders transducers from Omega. The order confirmations are prompt and the shipping labels contain all the necessary information for identification of parts that were shipped. Ordering items from Omega is very stress free.
Date published: 2021-12-30
Regarding LD320-100 is there a spec. for the number of turns or transformation ratio at full scale? Empirically I measured 2.132Vrms when my excitation signal is 3Vrms at 5kHz. But is this spec indicated anywhere?
There is no documentation indicating this specification. Please send your question to email pressure@omega.com. We would then be able to research your question and respond to you directly with an answer.
Date published: 2022-03-23
What is the resolution?
Jackie,
We don’t spec resolution for this transducer. It is dependent on the electronics that you are using to read the output, for example a digital display that reads to three decimal places.
Feel free to contact us if you have any further questions!
Date published: 2020-01-10
One end clearly has a male M6 thread. What is on the other end? Looks like a rounded off square boss. Is there a thread?
The end of sensor where the cable exits the unit has a threaded plug that can be removed and replaced with a rod end from the LD-UJOINT-KIT. The thread at that end is a M6 female thread.
Date published: 2023-04-27
Accessories