LVDT Linear Position Sensors with Current Output0 to 100 mm, 4 to 20 mA Output
Please add to cart to keep it or exit the configuration
- Being replaced by our new and improved LD621A-100 Series
- Better Than 0.2% Linearity
- 5 to 300 mm Travel Lengths Available
- 4 to 20 mA or 20 to 4 mA Versions Available
- Rugged Stainless Steel Body Construction
- IP67 Environmental Rating
- Guided Core with Removable Spring for Easy Installation
Linear Servo Actuator
Industrial Automation Controls
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
The LD630 series has been replaced by the new and improved LD600A series. Many ranges are in stock, available for immediate shipment.
DescriptionThe LD630 Series current output displacement transmitters have improved IP67-rated sealing, coupled with polymer guides with rigid carriers. These transmitters are accurate and reliable, especially in wet and corrosive conditions. Typical applications include automation actuators, industrial automation controls, and proportional actuators.Output options are either direct-acting 4 to 20 mA or reverse-acting 20 to 4 mA. The direct acting models will have 4 mA output when the guided core is fully out, and the output will increase to 20 mA when fully in.
Linearity: <0.2% FSO
Excitation Voltage: 10 to 30 Vdc
Output Ripple: 0.02% FSO
Bandwidth: 500 Hz (-3 dB)
Storage Temp: -20 to 85°C (-4 to 185°F)
Operating Temp: 0 to 65°C (32 to 149°F)
Vibration (Sinusoidal Frequency):
10 to 50 Hz: 1 to 10 g rms linear Amplitude
50 Hz to 1 kHz: 10 g rms Amplitude
Drop Testing: 1 m (3') onto hard surface
Topple Testing: 10 times each end onto hard surface
Cable: PFA, 2 m (6') long
Core Material: Nickel-Iron