Skip to main content Skip to navigation

Intrinsically Safe Open Channel Pulse Radar Level Transmitter

1" NPT, 4.88" Antenna, 12" to 98.4" Range

0.0

(0)

1" NPT, 4.88" Antenna, 12" to 98.4" Range

Click and hold to zoom

Data Sheet (PDF)

$2,000.00

Item# LR31-0021-10-00

QTY

Added to Your Shopping Cart

In stock

Lead Time (If not in stock): 14 weeks

+ Add to Project List

Rugged IP68 level sensor enclosure with 304 SS mounting bracket
Configuration via push button display or HART communicator
26 GHz. pulse radar is unaffected by sump process conditions
Wall mounted display with windowed enclosure rated IP67

View Specs

LR31-0021-10-00 Model Options

View all models

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination.

Category

Media type

Accuracy

Tank/Vessel Type

Max Measurement Range

Output Signal

Max Operating Pressure

Max Process Temperature

Wetted Materials

Probe Style

Supply Power

Process Connection Type

Process Connection Size

Features

Specs

Edit Model Options

Beam Angle 12°
Certification FCC
Accuracy Value +/- 3mm
Display Type LCD
Frequency 26 GHz
Maximum Liquid Temperature 100C (212F)
Maximum Operating Pressure Atmospheric
Measurement Type Level
Minimum Ambient Temperature -40°C (-40°F)
Minimum Liquid Temperature -40C ('-40F)
Retransmission/Analog Output 4 to 20 mA, HART 7
Supply Voltage 21.6 to 26.4 Vdc
Wetted Materials None
Classification Intrinsically safe
Measurement Unit Ft/M

The intrinsically safe 26 GHz. pulse radar transmitter provides continuous level measurement up to 98.4’ (30m) with a 4-20 mA analog and HART digital signal output, and is configured via its remote push button display module or HART communicator. The non-contact liquid level sensor is intended for industrial wastewater, municipal storm or sewer lift station, reservoir, river, canal or open channel applications located below or above grade. Select this sensor for challenging process conditions that may include light surface foam or agitation, small trash or plant material, wind, condensation or vapor. Each comes with a 32.8’ (10m) cable, mounting bracket and display module. The sensor is designed for bracket mount installation suspended above the liquid

Lift Stations
Industrial and municipal pump lift stations collect and transfer wastewater or stormwater into treatment. These receptacles are dynamic environments that contain dirt, grease, oil, agitation, sludge, foam, condensation, chemicals or vapor. The LR31 pulse radar sensor is unaffected by such challenging process conditions, and is designed for bracket mount installation, either downhole or above grade based on your needs.

All Models