Call us at 1-888-826-6342
Wet/Wet Differential Board Mounted Pressure Sensors
0 to 1 psi, Gauge Pressure
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | $119.67 |
| 10-24 | $113.69 |
| 25-49 | $111.29 |
| 50-99 | $106.51 |
| 100+ | $104.11 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Wet/Wet Differential Pressure
Water and Many Other Liquids May be Applied to Both Sides - Gage and Differential Models Available
- Miniature PC Board Mountable Design
- SIP 4-Pin Package
PX26-001GV Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Pressure Range
Pressure Type
Electrical Output
Accuracy Class
Accuracy Value(compensated range)
Output Signal
Pressure Port Size
Pressure Port Type
Connection/Termination
Operating Temperature Range
- Excitation 10 Vdc
- Accuracy Value 0.25
- Input Resistance 7.5 kΩ
- Output Resistance 2.5 kΩ
- Repeatability 0.2% FS
- Wetted Materials Silicon Diaphragm
- Zero Balance ±1.5 mV
OMEGA’s PX26 Series pressure sensors feature state-of-the-art silicon technology which permits both sides of the diaphragm to handle liquids. A unique conductive seal between the silicon diaphragm and the plastic housing allows for wet/wet applications and lower production costs than typical gold wire silicon sensors. This new construction has a larger diaphragm than traditional silicon sensors, resulting in increased long-term stability.
SPECIFICATIONS
Excitation:10 Vdc, 16 Vdc max @ 2 mA
Output (@ 10 Vdc):1 psi = 16.7 mV, 5 psi = 50 mv; >5 psi = 100 mV; 250 psi = 150 mV
Linearity:±0.25% FS BFSL Typical
(±1% maximum) P2>P1
Hysteresis and Repeatability:0.2% FS
Zero Balance:±1.5 mV
Span Tolerance:±3.0 mV
1 Year Stability:0.5% FS
Operating Temperature:-40 to 85°C (-40 to 185°F)
Compensated Temperature:0 to 50°C (32 to 122°F)
Thermal Effects:
Zero: 1 mV Span: 1% Rdg
Proof Pressure:20 psi for ≤5 psi;
45 psi for 15 psi ; 60 psi for 30 psi
200 psi for 100 psi range
Input Resistance:7.5kΩ
Output Resistance:2.5kΩ
Response Time:1 ms
Gage Type:Silicon sensor
Wetted Parts:Polyethimide, silicon, fluorosilicone
Mating Connector:CX136-4, ($2.50), not included
Weight:2 g (0.07 oz)
Rated 3 out of
5
by
Jack2019 from
Sometimes OK but sometime not
We bought this a month ago for our water pressure loop test, initally it was good and be sensitive to pressure drop changes and read correctly.
However, after switching and squeeze air out of in and outlet lines, found the connection was easy to break and get wet so readings were really out of range.
Date published: 2019-01-23
Rated 5 out of
5
by
Cray from
Pressure measurements inside small ID thin tubing
We use these pressure gauges in combination with the PLATINUM™ Series Digital Panel Meters (DP8PT-006) to determine the pressure inside thin flexible tubing as water is flowing inside. WE use three of these pressure gauges along the tubing and can determine the pressure changes with the experimental conditions. They work well and are responsive.
Date published: 2024-02-14
Rated 5 out of
5
by
WJB ENTERPRISE from
Filter Supplies
This order and every one I have placed with Omega has been handled very efficiently.
Date published: 2023-03-15
How high of a vacuum will this sensor tolerate? I don't need a vacuum readout, but it would likely experience a vacuum equivalent of ~50-75 psi.
This unit is not designed for vacuum application, if this application requires a vacuum measurement you may want to choose a different product.
Date published: 2021-08-10
Is any step file (3D) availabe for the PX26-Series ?
Thank you for your inquiry.
We do not have a 3d model for this unit.
The dimensional information is listed on the specification page .
Hope this was helpful.
Date published: 2020-07-28
We are using the +- 1 psi differential pressure sensor. When we connect the pressure sensors as shown in the data sheet (with 10V input), we are measuring the ouput voltage to 2.6V. Do you know why, is it an off-set voltage?
Are you wiring the sensor differentially (power connections separate from signal connections). If the negative signal connection and the negative excitation are connected to a common point you will get a high voltage signal output. If the connects are not commoned together you most likely have damaged sensor sensor
Date published: 2021-04-22
What is the material used for the case of this sensor?
The case material is indicated as polyethimide
Date published: 2023-09-15
