

Low Cost SS Compact Pressure Transmitter
$99.00
Item# PX119-015AI

Volume discounts available
Volume Discount Schedule
Quantity | Price each |
---|---|
1-4 | $99.00 |
5-9 | $97.02 |
10-24 | $95.04 |
25-49 | $91.08 |
50-99 | $90.09 |
100+ | $89.10 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
In stock
Lead Time ( If not in Stock): 7 Days
Low Cost SS Compact Pressure Transmitter is rated
out of
5 by
4.
- Designed to integrate with a variety of industrial and OEM applications with its compact, rugged, and SS body
- Piezo-resistive ceramic diaphragm provides premium thermal compensation for minimal thermal drift
- Comes with 20mm Mating DIN Connector
- Perfect for applications where a 0.5% accuracy is desired
- No minimum purchase required
Product info
Pressure Range
0 to 15 psi
Pressure Type
Absolute
Accuracy Class
> 0.25%
Accuracy Value (compensated range)
±0.5%
Output Signal
Current
Electrical Output
4 to 20 mA
Pressure Port Size
1/4"
Pressure Port Type
NPT Male
Connection/Termination
Mini DIN 43650 C
Operating Temperature Range
-40 to 135 °C (-40 to 257 °F)
Product Specs
- Accuracy Value 0.50% BFSL Accuracy
- Maximum Compensation Temperature 0°C (32°F)
- Minimum Compensation Temperature 0°C (32°F)
- Vibration 10 g (20 to 2000 Hz) for <58 psi (4 bar)
- Wetted Materials 304 SS and Ceramic Al2O3
Pressure Without the Pain
Ideally suited for material handling, industrial and mobile equipment applications where a small, yet rugged SS body size is desired at a reasonable price point. The body is machined from a single piece of stainless steel to provide added protection for the internal electronics as well as prevent corrosion from most applications. A piezoresistive ceramic sensor along with ASIC signal conditioning provides an excellent thermally compensated output.
- SIMPLE
- MULTIPURPOSE
- COMPACT

Monitor pressure/height in vehicle suspension
Regulate pneumatic door operation
Monitor excessive load
Monitor lift operation
Monitor compact pressure
Monitor lift operation
Monitor compact pressure

Great cost: performance ratio
Accuracy: 0.5% BFSLLarge pressure range
15 to 5000 psi (absolute or gauge)Piezoresistive ceramic diaphragm
Excellent thermally compensated output
Operating temp: -40 to 135°C (32 to 185°F)Reliable output with signal conditioning
Output: 4 to 20 mA / Input: 8 to 30 Vdc
Response time: 1 msRugged form factor
Shock and vibration resistant
10g for <58 psi/20g for >58 psiResists corrosion and water
304 SS body
Wetted materials: Ceramic AI2O3, NBR
Rated 4 out of
5
by
dlyman from
Awesome
I needed a pressure transmitter and looked everywhere. I found very cheap to very expensive and long ship times. I ordered the Omega. I got it in 2 days and it has worked very well
Date published: 2018-05-14
Rated 5 out of
5
by
Flaco from
Pressure Transmitter
This is a rugged little piece of equipment. I'ts accurate enough for what I'm doing, has held up to sub-optimal conditions and the price is unbeatable.
Date published: 2019-02-05
Rated 4 out of
5
by
Chris at FTS from
Easy to Install and Use
We purchased several of these in three different ranges. The first item is the ease of wiring the connector. Previous transducers used required soldering the wires to the connector terminals. There units have a simple screw lug that you simply insert the lead and screw tight in place. The time involved was less than half to complete connections.
The transducers themselves work very well.
My only minor concern is that the terminals on the transducer are exposed and can be bent easily. However, since there should be minimal need to remove the transducer connector, this is not a big concern.
Date published: 2019-03-06
Rated 4 out of
5
by
kriss from
good
value for money: they are good, practical and low cost
Date published: 2018-08-08
Are these National Sanitation Foundation (NSF) certified?
NIST certification cannot be supplied with this unit.
Date published: 2019-11-20
I am using this pressure transducer in conjunction with water, can water flow into the mini DIN connector ? If not, how can I prevent water from flowing into this space and get a pressure reading?
Unfortunately, the unit PX119 is not a waterproof unit so the application that you have mentioned (water flowing into the connector) will not work. We do sell submersible units that are great for that application like the PX709 series. All those would be a bigger investment. You could try and RTV the entire PX119 to see of you would give you a waterproof seal? The main issue is trying to keep an electrical connection dry! Thanks for connecting with us, let us know if you have any further questions.
Date published: 2019-05-15
Can this be use for oil?
The wetted parts for the PX119 are 316 SS, ceramic, and Nitrile rubber (NBR). The wetted parts are the surfaces that will come in contact with the process fluid. While we cannot speak for all oils or fuels. The wetted materials of the PX119 are generally resistant to oil, fuel, and other chemicals. We recommend that users investigate material compatibility for their specific application if they have any concerns.
Date published: 2019-04-17
Can the 1/4 NPT male port be connected into a tee fitting, to which it would measure the pressure of water directly? The rest of the transducer would not be exposed to water or submerged in water, but water will be free to flow into the male port.
Thank you for reaching out to us with your question. Yes, it can. The wetted parts are Ceramic, NBR 304 SS - all are compatible with water.
Date published: 2019-02-22
How is the zero/span adjusted for this transducer?
Thank you for contacting Omega. This transducer does not have any capability to adjust the outputs. The PX509 or PX51 are products that offer trim pots to make these sort of adjustments. Please contact our Tech Support if you need any further assistance. https://www.omega.com/pptst/px51-pxm51-series.html
Date published: 2019-02-19
Would a sensor like this make sense to use to measure vacuum ?
Hi, thanks for your question. We do not offer PX119 that measures gauge pressures less than zero. I would recommend the PX309, we have vacuum ranges available.
Date published: 2019-01-17
What is the maximum pressure that the PX119-600AI can withstand without damage to the transducer?
Hello, this data can be found on the product spec sheet. Please note, to understand the table there are 2 values overload and burst. Proof is the safe pressure limit for when below the sensors output will not permanently change. Burst is the safe pressure limit, above which the sensor may break-open under pressure. For the PX119-600AI:
Proof is 241.7% so 600*2.417= 1450 psi
Burst is 2901% so 600*2.417= 1740 psi
Date published: 2018-11-28
Is the conversion/curve between current output and pressure linear for all regions? I.e. 4 mA output corresponds to 0 and 20 mA corresponds to the maximum (15 Psi Gauge for mine). Does 12 mA correspond to 7.5 Psi Gauge?
Thanks for your question. Yes, the output should change linearly from 4 to 20 mA, through the range of the device 0-15 psi, meaning the 12 mA corresponds to 1/2 of the range of the device, or 7.5 psi G in this case. Feel free to contact our Tech Support if you have any further questions.
Date published: 2019-01-17
CE