These RTD sensors are used extensively in plastic processing for measuring mold and equipment temperatures, and other applications where easy installation and removal are required. These sensors are installed using a spring loaded bayonet cap (BT Style) or compression fittings (CF Style). Mating adapters for the bayonet style mounting are also available (see BTA-1 through 6 depending on length needed)
Standard configurations are based on the most popular lengths with straight sheaths or with 90º bends. The included flex hose over the cable protects the wires from damage in rough environments. Standard terminations include spade lugs and Omega's OTP heavy duty connectors.
† All amounts shown in USD Note: * For other lengths of armored cable, change “60” in model number to length desired and add $3.50 per foot over 5 feet (60 inches). Other "A" lengths available. Price: $5 plus $1 per inch over 6"
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Adaptors for insertion and pipe clamp use also available. Ordering Example: (1) CF-000-RTD-2-60-2 Straight compression style probe, 2, $108.50
Part Number Builder
Build Your Part Number Below
Styles select from: BT for Bayonet style CF for Compression style
Bend Options select from: 000 for No bend 090 for 90° Bend
Length Options select from: 2 1/4 for 2 1/4 in (BT Only) 3 1/2 for 3 1/2 in (BT Only) 2 for 2 in (CF Only) 4 for 4 in (CF Only)
Termination Options select from: 1 for Spade Lugs 2 for OTP Connector
Note: All combinations may not be valid, check spec sheet for valid part numbers.