text.skipToContent text.skipToNavigation

If you have previously used the Omega Website, you will need to Reset your Password on the new site.
Resetting your password is required one time only.

Configure Product
Saved Configuration
View Configuration
Terms and Conditions
Saved Addresses
Please validate your credit card and billing information.
Payment submission timed out. The server might be busy.
There was an error processing your request.
Please validate your credit card and billing information.
Please enter a card number
Please select a card type
Please enter a value for this field
Please enter an expiry month
Please enter an expiry year
Please enter an issue number
Please enter a start month
Please enter a start year
The card number is not valid
The card type is not supported
The card verification code is not valid
The expiry month is not valid
The expiry year is not valid
The issue number is not valid
The start month is not valid
The start year is not valid
This field is required
Errors were found with the address you provided. Please verify your address.
Date should be in MM/DD/YYYY format
Please enter valid values
Please enter future date
Please enter the shipping date
Shipment date is updated

Surface-Mount RTD Advanced-Design: Stick-On or Cement-On

Item# SA1-RTD

Surface-Mount RTD Advanced-Design: Stick-On or Cement-On SA1-RTD SA1-RTD
  • 100 Ω DIN Class A (±0.06 Ω or ±0.15°C at 0°C) Accuracy Standard
  • Easy-Installation Silicone-Based, Self-Adhesive Backing Rated to 260°C (500°F)
  • Back Can be Reapplied
  • Temperature Range -73C to 260°C Continuous, 290°C (554°F) Short Term Operation When Installed with OMEGABOND Air Set Cements
  • Stripped 3-Wire Leads Standard (Connectors Optional), Color Code: Black/Black/Red
  • Optional 4-Wire Configuration (Color Code: Black/Black/Red/Red)
  • Stocked in 1 m (40") Lengths Also Available in 2 and 3 m (80 and 120") and Custom Length Lead Wires
  • Other Resistances/Accuracies Available on Request
  • Stainless Steel Overbraid Option to reduce electrical noise and protect lead wire from abrasion
Resistance or Output Type
Temperature Accuracy
Number of Wires
Mounting Style
Electrical Connection Type
Maximum Temperature Measurement
Minimum Temperature Measurement
Cable Length
Additional Features
 This item is available for quick shipping
See All Options
Quantity Price each
1-9 $61.95
10-24 $58.85
25-99 $55.76
100-499 $52.66
500-999 $49.56
1000+ $46.46

In stock

Lead Time ( If not in Stock): 2 weeks

Product Specs

  • Measurement Type Temperature
  • Minimum Temperature Measurement -73°C
  • Response Time Less than 0.9 s (63% response time in water immersion)

The SA1-RTD surface-mount RTD temperature sensor mounts on flat or curved surfaces and provides Class A accuracy for critical temperature monitoring applications. Based on a 2 x 2 x 0.8 mm thin-film platinum RTD and supplied with bare 3-wire leads as a standard configuration (connector optional), itcan be customized for use in a wide variety of applications. The sensor can be easily applied with its selfadhesive

backing, or positioned permanently with OMEGABOND™ cements.
Use the SA1-RTD to monitor chip, heat sink, and environmental temperatures in electronic devices; check piping or ducting temperatures;monitor motor and transformer core heat; test insulation capabilities; and check other applications in which surface and/or gradient temperatures need to be monitored or controlled.


Save Configuration